{{indexmenu_n>10}}

{{anchor:quickstart}}

====== Quick Start Guide ======

=== Welcome to ASTER! ===

=== In this guide, you will learn the basic settings required to run ASTER successfully. ===
{{anchor:quickstart_install}}


===== ASTER Installation =====

You can download the ASTER setup file from this link. [[http://www.ibik.ru/ru/downloads|Download]].

During installation, keep the default options and click "Next" button to continue. Installation requires of you to run the setup package with administrative privileges.

Installation process is described in detail in here: [[.:ugd:ugd_installation|]]

{{anchor:quickstart_runfirst}}


===== ASTER First Run =====

After the installation, your computer needs to be restarts. Once restarted, you need to run "ASTER" program from the start menu. (In case, it doesnot start automatically)

When you run "ASTER" for the first time, it will prompt you for upgrade. Click "OK" button to start the upgrade process:

{{  ..:..:controlform_needupgrade.png?nolink&  |Request the administration rights}}

After you click "OK" button, a unique identifier is created and is displayed in the information prompt:

{{  ..:..:controlform_installationid.png?nolink&  |Your ID }}

For more information about the identifier, click this link: [[.:ugd:ugd_licensing#ugd_licensing_installationid|Installation ID of ASTER]] .

{{anchor:quickstart_activation}}


===== ASTER Activation =====

Once the installation id is created, the program will restart itself. A prompt will open and show you two options:

{{  ..:..:welcome.png?nolink&423x358  |The Welcome Window}}

Make sure the computer has internet access. Click 2nd option if you have activation key and activate ASTER. Or click the 3rd button if you want to use ASTER in trial for 30 days.

If you are using internet through proxy, then you need to configure the ASTER to use proxy settings. For detailed information, click this link: [[.:ugd:ugd_config#ugd_config_proxy|Configure ASTER to use Proxy Server]].

{{anchor:quickstart_displays}}


===== Assigning Monitors =====

Once ASTER is installed, you need to connect all monitor and set their native resolution. You also need to put all monitor in extended desktop mode. To do this, right click on the desktop and choose **"Screen Settings"** or **"Screen Resolution"** (depending on the OS version it is different). Once you open the window, set the necessary monitor settings. In windows 7, then settings window looks like this:

{{  ..:..:quickstart_desktop.png?nolink&  |In this window you should extend these displays and choose the screen resolution }}

Now, open "ASTER" Control Panel and then click on "Workplaces" tab to assign monitors for each seat. The easiest way to assign monitors is to drag them into rectangular area under desired seat. The "Spare Parts" section contains unassigned devices including keyboard, mouse and monitors.

{{  ..:..:quckstart_displays.png?nolink&  |Device assigning by dragging them into work area}}

By default, when you start "ASTER" for the first time, all monitors are assigned to the first seat and some of them can be in **"Spare Parts"** section.

To know which monitor corresponds to each monitor in the settings of ASTER, you can check it from the device's tooltip but hovering over it or by clicking **"Indicate Device"** from the context menu for the monitor icon.

{{  ..:..:quickstart_infication.png?nolink&  |Indicate monitors}}

For more information regarding Indicating devices, click here [[.:ugd:ugd_config#ugd_config_indication|Indicating Devices]].

{{anchor:quickstart_asteron}}


===== Enabling ASTER and launching the workplaces =====

After you complete step 1-3, you can enable "ASTER". To do this, click the **"Enable ASTER and reboot PC"** button on the **"General Settings"** tab. After the computer restarts, ASTER will be enabled, but work places will not start working. You need to click "Start Workplaces" button to start the work places manually. This is required to test all work places status. Later, you can configure ASTER to automatically run the work places by selecting the desired launch option from the drop-down list:

{{  ..:..:quckstart_asteron.png?nolink&  |Enable ASTER and reboot PC}}

{{anchor:quickstart_otherdevs}}


===== Assigning Other Devices =====

You can assign other devices such as keyboard/mouse, game page and audio playback devices after ASTER is up and running. To assign these devices as well as monitors, simply drag and drop device's image under the desired workplace. When a device is active, it will be enclosed in blue frame on its image, like when you move mouse or press a key on the keyboard.

For more information on assigning devices, see this link [[.:ugd:ugd_config#ugd_config_assign|Device Allocation]].

{{anchor:quickstart_problems}}


===== Known problem and their solution =====

In most cases, the above steps are enough to run ASTER workplaces successfully. However, in case it does not work, you can follow the steps below:

  * Make sure that only drivers are installed for graphics cards (specially NVidia cards.). For incompatible programs, see FAQ: [[.:faq:faq_config#faq_config_incompatiblesoft|Incompatible software]] .

  * Assign monitor in simple order, i.e. monitor 1.1 on the first workplace, monitor 1.2 on the second workplace, etc. You can set monitors in any order depending on requirement.

  * You can contact our support clicking the **"Request Support*"" button {{..:..:controlform_supportrequest.png?nolink&|Send the request to the technical support}}in ASTER window. For more details on requesting support service from ASTER refer [[.:ugd:ugd_support|]].
  * Read our manual [[.:ugd|]], for answer to any question that you may have.