Differences

This shows you the differences between two versions of the page.

--- en:v2:core:ugd:ugd_config [2021/07/18 15:48]
127.0.0.1 external edit
+++ en:v2:core:ugd:ugd_config [2022/02/24 17:47] (current)
locko_t [Troubleshooting problems]
@@ Line 52: / Line 52: @@
 In the **"Workplaces"**  tab, you can choose which windows to display and hide (can not be hidden if the workplaces have devices assigned). Also, pay attention to the checkmark next to the item **"Displays without monitors"**  in this dialog, as well as to translucent ("off") images of displays.
-In fact, the images of the displays represent the video outputs of the video cards, which can be connected to monitors. The translucence of the display image reflects, that a monitor is not connected to the video output.
+The images of the displays represent the video outputs of the video cards, which can be connected to monitors. The translucence of the display image reflects, that a monitor is not connected to the video output.
 The item **"Displays without monitors"**  determines whether such outputs are displayed or not. By default, this checkbox is not checked, and translucent displays are not displayed.
@@ Line 68: / Line 68: @@
 {{anchor:ugd_config_view_devarested}}
-Some devices are displayed in a special way: - in an image behind the bars. These are so-called "devices on an inaccessible workplace" - devices assigned to workplaces that are currently unavailable because the number of the workplace exceeds the number of your licenses. This situation can occur, for example, after the end of the trial period, when all 12 jobs were available. The number of the workstation to which the device is assigned (shown in parentheses after the device name) can be seen by pointing the mouse at it. You can leave the device in this "unavailable" state in order to keep a binding to the workplace in the future or assign it to the available workplace.
+Some devices are displayed specially: - in an image behind the bars. These are so-called "devices on an inaccessible workplace" - devices assigned to workplaces that are currently unavailable because the number of the workplace exceeds the number of your licenses. This situation can occur, for example, after the end of the trial period, when all 12 jobs were available. The number of the workstation to which the device is assigned (shown in parentheses after the device name) can be seen by pointing the mouse at it. You can leave the device in this "unavailable" state in order to keep a binding to the workplace in the future or assign it to the available workplace.
 {{  ..:..:..:controlform_tabcontrol_tabterminals_arested.png?nolink&  |Devices on an inaccessible workplace are displayed in a image behind the bars}}
@@ Line 244: / Line 244: @@
-===== Setup an automatic user log on =====
+===== Setup an automatic user logon =====
 You can customize the workplaces (from the "General Settings" tab) to automatically log on with the credentials of a specific user.
@@ Line 260: / Line 260: @@
 {{  ..:..:..:logininfo_domain_v2_26.png?nolink&307x296  |Example of setting up automatic logon with a domain account type}}
-Click the **"OK"** button to accept or the **"Cancel"** button to discard the changes. To save changes on a permanent basis, do not forget to click the **"Apply"** button in the main window of the ASTER Control Panel.
+Click the **"OK"** button to accept or the **"Cancel"** button to discard the changes. To save changes permanently, do not forget to click the **"Apply"** button in the main window of the ASTER Control Panel.
 On the "General Settings" tab, you can also selectively specify which workplace will be enabled and which ones will not. To do this, in the "Status" column next to the corresponding workplace, you must select the item "Enabled" or "Disabled" from the list (the first place cannot be disabled).
@@ Line 335: / Line 335: @@
 ===== Troubleshooting problems =====
-If after turning on ASTER or applying new settings of monitors there are problems with displaying the desktop or with the computer loading, you need to restart the computer in safe mode and disable ASTER using the button "Turn off the ASTER and reboot the PC. Now, ASTER is disabled (after a normal restart of the computer with ASTER disabled) make proper adjustments of monitors.
+If after turning on ASTER or applying new settings of monitors there are problems with displaying the desktop or with the computer loading, you need to restart the computer in safe mode and disable ASTER using the button "Turn off the ASTER and reboot the PC. Now, ASTER is disabled (after a normal restart of the computer with ASTER disabled) make proper adjustments to monitors.
 To boot the computer in safe mode, press the **F8** key several times at the very beginning of the computer startup (until the Windows logo appears or "Start Windows") and select the Safe mode option in the boot options menu. For more information on loading the OS in safe mode, see the [[..:faq:faq_other#faq_other_fixbugs|FAQ]].