Differences

This shows you the differences between two versions of the page.

--- en:v2_25:core:faq:faq_terminals [2020/04/29 12:10]
wikiadmin [Determination of workstation number]
+++ en:v2_25:core:faq:faq_terminals [2020/05/20 17:21] (current)
psychrabi [How do I get remote access to the computer?]
@@ Line 55: / Line 55: @@
 The terminal computer access will work correctly only when TS is unblocked, i.e. the local user is not disabled when the login is remote. * The personal profile for RDP connection must have a password (RDP connection peculiarity)
-**2. Connection with such software as RAdmin, TeamViewer, UltraVNC, etc.**
+**2. Connection with such software as RAdmin, UltraVNC, Anydesk, etc.**
 Remote access programs working in the utility mode and/or using the mirror-driver cannot be used for connecting to extra working stations in ASTER. In order to get the possibility of remote control of all working stations one has to use administration programs which can run as custom applications, and not as utilities, in other words several copies can work simultaneously.
@@ Line 64: / Line 64: @@
 In the ASTER control panel in the **Video** tab the monitors should be assigned to the working stations in the usual manner and the working station number should be erased for the mirror-driver. After applying these settings you must find parameter in the Registry editor. There could be several such parameters, but one of them will have the value **0xffffffff** (4294967295). Set this parameter to 0 and reboot your computer. After this Radmin should start working again.
-**TeamViewer** works properly in all working stations. You should by no means install the HOST version. It might also be started without installing. The drawback is the impossibility of connecting to several working stations simultaneously. If you run it in several working stations you will be able to connect only to the last launched client TeamViewer.
 **UltraVNC** and similar software allows connecting to working stations independently. However, a further setting of the software might be required in order to be able to use different ports / connection screens, as well as ASTER setting for the application of different IP-аddresses.
+**TightVNC** can be used to remote ASTER workplace. However, when installing TightVNC viewer, uncheck "Register TightVNC Server as a system server" checkbox.
+{{ :en:v2_25:core:faq:tightvnc.png?nolink&400 | TightVNC installation}}
+After installing, from start menu open "TightVNC Server - Offline Configuration" and set different "Main server port".
+{{ :en:v2_25:core:faq:place1.png?nolink&400 | Place 1}}
+{{ :en:v2_25:core:faq:place2.png?nolink&400 | Place 2}}
+<WRAP center round info 60%> \\ If you have assigned IP address to each workplace, then you do not need to set different ports. \\ </WRAP>
+**AnyDesk** if you install it on the PC, it will run as a server and will show same AnyDesk address in all work places. To get different address for each workplace you should not install AnydeDesk instead you have to launch the AnyDesk executable on each workplace manually and set password (for unattended access). Once run, keep in mind not to install AnyDesk from any workplace.\\
+You can make this process auto by running AnyDesk from [[https://support.anydesk.com/Command_Line_Interface|commandline]] or batch.
+**Parsec **also allows you to remote in to each workplace separately. [[https://parsecgaming.com/downloads/|Download and install Parsec]] and login to your account and rename the host name to something easy to distinguish (as all workplaces will show same name otherwise). On your client PC, install parsec and login, you will see your workplaces listed and can connect to them.
 {{anchor:faq_terminals_energysaving}}
 ===== Using energy-saving modes (sleep / hibernation / disabling monitors) =====